ENDEAVOUR FOR WORLD-CLASS POLICE EQUIPMENT AND SERVICE
 |
| Place of Origin: | CHINA |
| Brand Name: | HAAQ |
| Certification: | ISO 9001 |
| Model Number: | FBK-5LD-M |
| Minimum Order Quantity: | 1 PCS |
|---|---|
| Packaging Details: | 83*83*38 cm, 19 KG, 9 PCS per CTN |
| Delivery Time: | Based on quantity |
| Payment Terms: | T/T, Paypal, LC |
| Supply Ability: | 3000 PCS per Month |
| Shell Material: | ABS | Visor Material: | PC |
|---|---|---|---|
| Visor Thickness: | 4mm (2-5mm Per Requirement) | Color: | Black, Blue, Green, RED, Or Customized. |
| Inner Buffering: | Polystyrene Foam | Size: | S/M/L |
| Name: | Police Riot Suit | Dlivery: | Based On Quantity |
| High Light: | police tactical equipment,military police equipment |
||
ABS Shell Anti Riot Helmet with Extended Neck Protector for Mexico Police & Army FBK-5LD-M
Police Anti-riot Helmet FBK-5LD is a lightweight and super tough protective helmet for military and law enforcement. Whether its crowd, riot, or corrections control, the high density thermo composite shell combined with the international brand polycarbonate face shield provides full head and face protection against almost all non-ballistic threats, such as chemicals, rocks, bottles and other projectiles.
The simplest form is a hard shell with reinforced padding, and a chinstrap and a hinge-up (usually polycarbonate) visor, as in this image. These riot protection helmet visors are usually curved sideways and straight up-and-down, not curved both ways like on the older type of motorcycle helmet. One accessory is a back-of-the-neck protector.
| Color | Black or Customized |
| Size | Difference thickness of foam, adjustable head circumference inside suitable for 540~600mm |
| Shell | ABS shell, scratch proof function, 4MM thickness |
| Visor | Polycarbonate visor with the rubber on stainless steel bar to prevent water, 4MM thickness, 175 +/- 2 mm length. |
| Neck protector | PE+foam inside |
| Material of chin cup | PVC chin cup |
| Performance: | The weight of 3kg steel cone falls from the height of 3m, can not pierce the empty helmet,it can bear 49 Joule impact |
| Anti penetration properties | The test is based on GA294-2001,steel pricker can not penetrate helmet, it can bear 88.2 joule puncture |
| Fire retardant | Apply the flame for a period of 10 seconds, then remove from the flame it will be self extinguished within 10 seconds. |
| Wear device | The helmet can bear 90kgs pull force. Stretch of Bridle ≤15mm. |
| Visibility | Visibility rate of the face guard 90% |
| Four ventilate holes, with gas mask retractor (optional) | |
| With suspension harness inside to buffer impact | |
Contact Person: Mr. Thomas Zhuge
Tel: +8618857704700
Fax: 86-577-86527333
